NYWBUK 24VDC Microwave Level Switch with 120m Range and IP67 Protection Class Level Switch with Threaded Connection
NYWBUK 24VDC Microwave Level Switch Working Principle
NYBUK series microwave leve switch is a solid level switch desiened with microwave extremely narrow pulse detecton principle, which is designed by microwave pair transmission and reception. The microwave level switch is a pair of complete sets of instruments. One end is the transmitting end, which is responsible for the transmission of microwave signals; the other end is the receiving end, which is responsible for the collection and output of microwave signals. The instruments are instaled in pairs at the position to be monitored. When there is no material blockage at the monitoring position, the receiving end outputs a "no material" signal ; When material blocking occurs at the monitoring position, the receiving end outputs "blocking material" signal. The state of the output signal can be set to high alarm and low alarm on the spot.
NYWBUK 24VDC Microwave Level Switch Design Features
1. High stability, strong anti-interference capability and intelligent adaptive power supply design.
2. Modular design concept with function indicator, which can easily and concisely realize the setting and maintenance of the instrument in the field.
3. Simple structure and easy installation.
NYWBUK 24VDC Microwave Level Switch Application Fields
1. Flow/Stop Detection
2. Slant chute blockage detection
3. Low level detection
4. High level detection
5. Conveyor item detection
6. Rail/Truck overload detection
7. Crane collision detection
8. Gas or viscous material blockage in feed pipe
9. With and without material level detection
NYWBUK 24VDC Microwave Level SwitchTechnical Parameters
| Typical application | Liquids, dust, solids |
| Model | NYWBUK |
| Material | SS304/316L |
| Measuring range | 120m |
| Power supply | DC 24V |
| Ambient temperature | -40 ~ +80℃ |
| Process temperature | -40 ~ +1200℃ |
| Process pressure | -0.1~ 2.5MPa |
| Process connection | Thread, flange (optional) |
| Protection class | IP67 |
| Explosion-proof grade | Exia II CT6 Ga (optional) |
Note: Products can be customized according to the specific requirements of users.
NYWBUK 24VDC Microwave Level Switch Installation Requirements
- Do not damage the insulation of the probe during installation. Avoid mechanical wear of probe and installation interface, container wall, material etc.
- The instrument guard line pipe must not have the stagnant water, otherwise will endanger the instrument electronic unit;
- As shown in figure 1, due to the directionality of microwave emissions, the transmitter and receiver installed in the same group must be in the same direction, or reverse 180 °. When the position is 90 °, the receiving end will not receive a valid signal.
- See figure 2. When multiple sets of microwave level switches need to be installed in adjacent locations, each adjacent set of instruments should be staggered 90 °. And keep the center distance above 500mm.
- See figure 3 fbr a typical installation diagram.
- Microwave level switches should be installed in pairs, one is the transmitter and the other is the receiver. The transmitter is responsible for transmitting the microwave signal and the receiving side is responsible for detecting the microwave signal and converting it to the level.
NYWBUK 24VDC Microwave Level Switch Related Pictures
|
|
NYWBUK 24VDC Microwave Level Switch with 120m Range and IP67 Protection Class Level Switch with Threaded Connection Images
|
